Close
RSS

New products

Raspberry Pi Model B+ Rev 1.2 512MB

The Raspberry Pi Model B+ is a single-board computer which is powered by the Broadcom BCM2835, a System-on-Chip that contains an ARM1176JZFS with floating point, running at 700MHz, and a Broadcom VideoCore 4 GPU. The GPU provides Open GL ES 2.0, hardware-accelerated OpenVG, and 1080p30 H.264 high-profile decode. The model B+ also has four USB ports.
$35.00

4 Channel 5V Relay XBee Shield

The 4 channel 5V relay xBee shield is capable of controlling 4 relays. The max switching power could be 250VAC/3A or 30VDC/3A. It could be directly controlled by Arduino/Funduion through digital IOs with external 9V power supply.
$14.99

2 Channel 5V Relay XBee Shield

The 2 channel 5V relay xBee shield is capable of controlling 2 relays. The max switching power could be 250VAC/10A or 30VDC/10A. It could be directly controlled by Arduino/Funduion through digital IOs with external 9V power supply.
$14.99

HDMI Male to VGA Female Cable

If you want connect your Raspberry Pi to a monitor or project with VGA input, this is the cable you need. This HDMI male to VGA female cable can convert the HDMI digital signal to VGA analog signal.
$9.99

Low-Profile MicroSD Card Adapter for Raspberry Pi

This low-profile MicroSD card adapter will make your Raspberry Pi even slimmer. It's only half the length of the SD card and easily to slide into the SD card slot.
$5.95

8 Channel 12V Relay Module

The 8 channel 12V relay module provides 8 optically isolated inputs that accept a wide range of voltage. This is a great way to switch on or off AC or DC loads using your Arduino.
$10.99

4 Channel 12V Relay Module

The 4 channel 12V relay module provides 4 optically isolated inputs that accept a wide range of voltage. This is a great way to switch on or off AC or DC loads using your Arduino.
$7.99

2 Channel 12V Relay Module

The 2 channel 12V relay module provides 2 optically isolated inputs that accept a wide range of voltage. This is a great way to switch on or off AC or DC loads using your Arduino.
$5.99