Close

Products tagged with 'Raspberry Pi'

5V 1000mA USB Port Power Adapter

This is a 5V 1000mA USB power adapter that works with Raspberry Pi. The input is 100V to 240V, so it works in any country. The adapter does not have a cable, instead there is a USB 'A' type port on the bottom, where you can plug any USB cable in.
$5.95

802.11n 150Mbps USB Wireless Adapter

This is the smallest USB 802.11n 150Mbps wireless adapter that compatible with Raspberry Pi. Take advantage of the Raspberry Pi's USB port to add a cable free high speed network connection.
$10.95

Aluminum Heatsink for Raspberry Pi Model B

This is a 3 pieces aluminum heatsink kit for the Raspberry Pi Model B Rev2.0. The heatsink will reduce the risk of hardware failure and is a must for the overclocking.
$3.99

HDMI Male to VGA Female Cable

If you want connect your Raspberry Pi to a monitor or project with VGA input, this is the cable you need. This HDMI male to VGA female cable can convert the HDMI digital signal to VGA analog signal.
$9.99

Low-Profile MicroSD Card Adapter for Raspberry Pi

This low-profile MicroSD card adapter will make your Raspberry Pi even slimmer. It's only half the length of the SD card and easily to slide into the SD card slot.
$5.95

Raspberry Pi Camera Module Board

The Raspberry Pi Camera Module is a custom designed add-on board for Raspberry Pi. It attaches to Raspberry Pi by CSI interface, which was designed especially for interfacing to cameras. The Camera is capable of 2592x1944 pixel static images, and also supports 1920x1080p30, 720p60 and 640x480p60/90 video.
$29.95

Raspberry Pi GPIO Breakout Kit

The Raspberry Pi GPIO breakout kit comes with a 26 pin ribbon cable, a PCB board, ribbon cable socket and header pins. The PCB has all the pins labeled nicely so you can go forth and build circuits without keeping a pin-out printout at your desk. We think this will make it more fun to expand the Pi and build custom circuitry with it. The breakout kit also prvoide 5V and 3.3V to your breadboard.
$7.99

Raspberry Pi Model B Rev 2.0 512MB

The Raspberry Pi Model B is a single-board computer which is powered by the Broadcom BCM2835, a System-on-Chip that contains an ARM1176JZFS with floating point, running at 700MHz, and a Broadcom VideoCore 4 GPU. The GPU provides Open GL ES 2.0, hardware-accelerated OpenVG, and 1080p30 H.264 high-profile decode.
$29.99
1 2 Next